ACTEON Equipment SATELEC Implant Center, User Manual

Page: 8 / 156

- Item 12: Irrigation on/off
- Item 13: Error message zone
- Item 14: Irrigation flow rate
- Item 15: Parameter setting zone
- Fig. 3, Item 25: Selected side
I-S
URGE
mode:
Display and indicator identification (Fig. 5-16 to
19).
- Item 16: Rotation direction
- Item 17: Control footswitch type
- Item 18: I-S
URGE
tab
- Item 19: Current program number
P
IEZOTOME
mode:
Display and indicator identification (Fig. 6,-20 to
21).
- Item 20: Current program number
- Item 21: P
IEZOTOME
tab
N
EWTRON
mode:
Display and indicator identification (Fig. 7-22 to
24).
- Item 22: Current program number
- Item 23: N
EWTRON
tab
- Item 24: Color code (CCS) used (Figure 3, (24))
b) Control unit back panel
The power receptacle (Fig. 2-1) with its
grounding pin is used to connect the I
MPLANT
C
ENTER
to the power supply using a plug-in power
cord.
The footswitch connector (Fig. 2-2) is used to
connect the I
MPLANT
C
ENTER
to the multifunction
control footswitch.
The fan (Fig. 2-3), protected by a metal grille,
keeps the I
MPLANT
C
ENTER
at its optimal
performance level.
The bracket holders (Fig. 2-4) are used to install
the brackets.
The power switch (Fig. 2-5) is used to switch the
device on or off.
c) Control unit sides
- The pump housings (Fig. 1-9) are designed to
accommodate SATELEC disposable irrigation line
cassettes.
- The irrigation cassettes are installed by lifting
the pump covers and inserting the cassettes
horizontally into the cassette housings.
d) Front panel
- The left connector is designed to accept the
connector of the I-S
URGE
micro-motor cord. A
SATELEC micro-motor cord must be used.
- The right connector is designed to accept the
connector of the N
EWTRON
cord or the connector
of the P
IEZOTOME
handpiece cord.
e) Control footswitch
The availability of a large number of functions on
the control footswitch allows the practitioner to
work in a perfectly sterile environment, avoiding
the risk of cross-contamination.
Once the various settings have been adjusted,
the user has no further need to touch the keypad.
Depending on the mode, the control footswitch
buttons have different functions.
I-S
URGE
mode:
Footswitch button definition (Fig. 8-1 to 5).
- Item 1: Irrigation on/off
8