ACS-CONTROL-SYSTEM GmbH
l Lauterbachstr. 57 l D-84307 Eggenfelden l www.acs-controlsystem.de l [email protected]
7
4. Description of function and operation
5
4. Description of function and operation
Operation
The operation is divided into three different levels.
Menu level
(delivery status)
This level was designed for the standard settings of the device. Only menu items which are sufficent to set
the device into operation are displayed. To get into the professional level, run through the menu level and
parameterise
prof
under menu item
RUN
.
Menu group level
(complete function volume)
Suited for complex applications as e.g. linkage of alarms, setpoint treatment, totaliser function etc. In this
level function groups which allow an extended parameterisation of the standard settings are availabe. To
leave the menu group level, run through this level and parameterise
uloc
under menu item
RUN
.
Parameterisation level
:
Parameters deposited in the menu item can here be parameterised. Functions, that can be changed or
adjusted, are always signalised by a flashing of the display. Settings that are made in the parameterisation
level are confirmed with
[P]
and thus saved. Pressing the
[O]-key
(„zero-key“) leads to a break-off of the
value input and to a change into the menu level. All adjustments are saved automatically by the device and
changes into operating mode, if no further key operation is done within the next 10 seconds.
Keys for up and down navigation in the menu group level.
Change to menu level.
Change into menu level or break-off in value input.
Parameterisation
level
Adjustment of the value / the setting.
Keys for up and down navigation in the menu level.
Description
Key
Change into operation mode or back into menu level.
To confirm the changes made at the parameterisation level.
Change into operation mode.
Change to parameterisation level and deposited values.
Menu group level
Menu level
Level
