ACS contsys DAL-311 5 0S Series, Operating Instructions Manual

Page: 18 / 40

ACS-CONTROL-SYSTEM GmbH l Lauterbachstr. 57 l D-84307 Eggenfelden l www.acs-controlsystem.de l info@acs-controlsystem.de
18
5. Setting up the device
16
Minimum constant value,
con.mi
:
Default:
-i9999
The minimum constant value is adjusted from the smallest to the highest digit with the
navigation keys [ ▲ ] [ ▼ ] and confirmed digit per digit with [P] . A minus sign can only be
adjusted on the highest digit. After the last digit the display changes back into menu level.
Brightness control,
Light
:
Default:
10
The brightness of the display can be adjusted in 16 levels from 00 = very dark to 15 = very
bright via this parameter or alternatively via the navigation keys from the outside. During the
start of the device the level that is deposited under this parameter will always be used, even
though the brightness has been changed via the navigation keys in the meantime.
Display,
dISPL:
Default:
actua
With this function the current measuring value, min/max value, totaliser value or the process-
controlled Hold-value can be allocated to the display. With
[P]
the selection is confirmed and
the device changes into menu level.
Maximum constant value,
con.ma
:
Default:
99999
The maximum constant value is adjusted from the smallest to the highest digit with the
navigation keys
[ ▲ ] [ ▼ ]
and confirmed digit per digit with
[P]
. A minus sign can only be
adjusted on the highest digit. After the last digit the display changes back into menu level.
Parameterisation level Menu level
5. Setting up the device
16
Minimum constant value, con.mi :
Default: -i9999
The minimum constant value is adjusted from the smallest to the highest digit with the
navigation keys [ ▲ ] [ ▼ ] and confirmed digit per digit with [P] . A minus sign can only be
adjusted on the highest digit. After the last digit the display changes back into menu level.
Brightness control, Light :
Default: 10
The brightness of the display can be adjusted in 16 levels from 00 = very dark to 15 = very
bright via this parameter or alternatively via the navigation keys from the outside. During the
start of the device the level that is deposited under this parameter will always be used, even
though the brightness has been changed via the navigation keys in the meantime.
Display,
dISPL:
Default: actua
With this function the current measuring value, min/max value, totaliser value or the process-
controlled Hold-value can be allocated to the display. With [P] the selection is confirmed and
the device changes into menu level.
Maximum constant value, con.ma :
Default:
99999
The maximum constant value is adjusted from the smallest to the highest digit with the
navigation keys [ ▲ ] [ ▼ ] and confirmed digit per digit with [P] . A minus sign can only be
adjusted on the highest digit. After the last digit the display changes back into menu level.
Parameterisation level Menu level