ACS-CONTROL-SYSTEM GmbH
l Lauterbachstr. 57 l D-84307 Eggenfelden l www.acs-controlsystem.de l [email protected]
30
5. Setting up the device
28
Menu group level
5.4.8. Totaliser (Volume metering)
Menu level
Totaliser factor,
Facto
:
Default:
ie0
At this the factor (1E0…1E6) respectively the divisor for the internal calculation of the
measuring value is assigned.
Time base,
t.base:
Default:
sec
Under this parameter the time base of the measurement can be preset in seconds, minutes or
hours.
State of totaliser,
total:
Default:
off
The totaliser realizes measurements on a time base of e.g. l/h, at this the scaled input signal is
integrated by a time and steadily (select
Stead
) or temporarily (select
temp
) safed. Select the
constant storage for consumption measurements and the quick storage for frequently filling
processes. During the constant storage
STEAD
the current sum value is safed at each totaliser
reset. Furthermore it is safed every 30 minutes in the not-quick storage of the device. If
Off
was
selected, the function is deactivated. With
[P]
the selection is confirmed and the device
changes into menu level.
Setting up the decimal point for the totaliser,
tot.dt:
Default:
0
The decimal point of the device can be adjusted with the navigation keys
[
▲
] [
▼
]
. With
[P]
the
selection is confirmed and the device changes into menu level.
Parameterisation level
Menu level
…
