Chapter 3 Entering softpatch and system settings
29
Changing [Set] default level
The default value assigned to [Set] is 95 percent. Follow these steps
to change the default value for [Set]:
1. Press [Setup]. Display reads:
Setup Utility
DISK
CONFIG
2. Press [F3] (Config); display reads:
Select Setup Desired
PATCH
CONSOLE
QUIT
3. Press [F1] (Patch).
4. Use [F1] (Last) and [F2] (Next) to scroll through the setup options
until display reads:
2 Set Level
95
LAST
NEXT
CHANGE
5. The number in the upper right hand corner of the display
represents dimmer output level. Press [F3] (Change) to change
the output level dimmer. Display reads:
2 Set Level
95
DOWN
UP
SET
6. Press [F1] (Down) and [F2] (Up) until the desired output level is
displayed in the upper right hand corner of the display.
7. Press [F3] (Set) when the desired output level is displayed.
8. Press [Setup] again once you have made your selection. Display
returns to Crossfade view.
www.carlosmendoza.com.mx