Chapter 4 Learning the basics
51
Example
Follow this example to create scenes A and B and run a timed
crossfade between the two scenes. Before you start, make sure
Grandmaster is set at
10
and [B/O] LED is off.
Action
Effect
Set scene A cross fader at
10
Sets scene A output at 100
and B cross fader at
0
.
percent and scene B at zero.
Set Time slider at
0
.
Sets fade time at zero (fade is
manually controlled by moving
cross faders).
Set scene A sliders 1 through 5
Sets scene A channels 1 through
at
7
; set remaining scene A
5 at 70 percent; all other channels
sliders at
0
.
are set at zero percent.
Set scene A and B Time sliders
Sets scene A and B fade times at
at
1m
.
one minute.
Set scene B sliders 6 through 10 Sets scene B channels 6 through
at
4
; set remaining channels
10 at 40 percent; sets all other
at
0
.
channels at zero percent.
Move scene A cross fader to
Fades scene A out and brings
0
and scene B cross fader to
scene B up on stage. Crossfade
10
simultaneously.
takes one minute.
www.carlosmendoza.com.mx