Chapter 4 Learning the basics
61
Copying submasters
You may want to copy a submaster or use submasters as building
blocks for new submasters.
To copy a look from one submaster to another, follow these steps:
1. Bring up the submaster you want to copy.
2. Press [Subs], then press the bump button where you want to
record the copied submaster.
Deleting submasters
To delete a submaster, rerecord it with all channel sliders set at zero
output. In effect, you delete a submaster by recording a new one over
it with all channels set at zero. Follow these steps to delete a
submaster:
1. Press [B/O] or set all channel, submaster and memory sliders at
zero.
2. Press [Subs]. Display reads:
To Record, Select Sub #
LOAD
SAVE
EDIT
3. Press the submaster bump button where you recorded the
submaster originally. This rerecords the submaster with all
channels set at zero percent.
www.carlosmendoza.com.mx