Chapter 3 Entering softpatch and system settings
19
5. Press [F3] (Change); display reads:
4 Default Level
95
DOWN
UP
SET
6. Press [F1] (Down) or [F2] (Up) to decrease or increase the output
level displayed in the upper right hand corner of the display.
7. Press [F3] (Set) to set the new default level, then follow steps to
assign default softpatch to reconfigure the softpatch with the new
default output. See page to review procedure.
8. Press [Setup] to return to regular operation.
www.carlosmendoza.com.mx