Chapter 3 Entering softpatch and system settings
17
Entering default one-to-one softpatch
The one-to-one softpatch assigns dimmer 1 to channel 1, dimmer 2 to
channel 2, and so on. If you have more dimmers than channels, the
default setting assigns the first extra dimmer to channel 1, the second
extra dimmer to channel 2, and so on.
Follow these steps to create a one-to-one softpatch:
1. Press [Setup]. Display reads:
Setup Utility
DISK
CONFIG
2. Press [F3] (Config); display reads:
Select Setup Desired
PATCH
CONSOLE
QUIT
3. Press [F1] (Patch). One of six patch option screens appears in the
LCD Operator Display. Use [F1] (Last) and [F2] (Next) to scroll
through the patch options until screen reads as below.
6 Set Default Patch
NO
LAST
NEXT
CHANGE
4. Press [F3] (Change) until display reads:
6 Set Default Patch
YES
CONFIRM
QUIT
5. Press [F1] (Confirm) to confirm your choice, or press [F3] (Quit) to
return to previous screen.
6. Press [Setup] to enter the default softpatch and return to regular
operation.
Note: All dimmers are automatically set at the default output level in
the default softpatch. The factory-set default is 100 percent. For
information on changing the default level see page
XX
.
www.carlosmendoza.com.mx