Chapter 5 Learning advanced techniques
97
Loading a series of memories or submasters to
cross faders
Follow these steps to use Sequence [Seq] to load memories or
submasters to cross faders.
1. Set both cross faders to zero.
2. Press the [Load] button over the cross fader where you want to
load the first memory. Display reads:
To Load, Select Mem/Sub
QUIT
3. Press the channel 1 bump button. Display reads as below.
Memory 1 is used here as an example. You can start [Seq] by
loading any memory or submaster into either cross fader.
①
②
③
①
②
③
00 00 :00 |FL FL :00 |
⑥
M>1 MAN | MAN MAN | FL
④
⑤
④
⑤
⑦
①
Cross fader settings
②
Cross fader output levels
③
Time slider settings
④
Current cross fader mode
M>1 indicates that memory 1 is loaded to the scene A
cross fader. MAN indicates that scene B cross fader
controls scene B output.
⑤
Next cross fader mode to be loaded
⑥
Blackout status
⑦
Grandmaster output level
www.carlosmendoza.com.mx