36
Chapter 3 Entering softpatch and system settings
Console setup
The
Acclaim 300 has a variety of user selectable system settings. Two
of these settings allow you to set the brightness and contrast of the
console's LCD Operator Display to suit your working environment.
In addition to changing the appearance of the console's LCD displays,
Acclaim 300 system settings enable you to select from a variety of
performance enhancements that can improve the processing speed of
the
Acclaim 300 by disabling unused features.
Selecting system settings
Acclaim 300 allows you to temporarily disable certain console features
you are not using to increase the console's processing speed. All
setup options are listed on page
XX
. Follow these steps to change
system settings: .i.System
1. Press [Setup]. Display reads:
Setup Utility
DISK
CONFIG
2. Press [F3] (Config), then [F2] (Console) to access console setup
options. One of the console setup options listed below is
displayed. Display might read:
1 Display Backlight
1
LAST
NEXT
CHANGE
In this example, the console option displayed is number
1,
Display Backlight
, which enables you to change the brightness
of the LCD Operator Display.
3. Press [F1] (Last) and [F2] (Next) to scroll through the remaining
setup options. The choices you may make about the particular
setup option appear in the upper right hand corner of the LCD
Operator Display.
4. Press [F3] (Change) to scroll through an option's setup choices.
5. Press [Setup] again to select the choice displayed. Display returns
to Crossfade view.
www.carlosmendoza.com.mx