![background image](http://html1.mh-extra.com/html/acclaim-lighting/300-series/300-series_user-manual_3686265033.webp)
26
Chapter 3 Entering softpatch and system settings
Using Non-Dim
Non-Dim is a dimmer output option that allows you to use a dimmer
or dimmers to operate devices that require power to be turned on and
off rather than turned on and then variably controlled. When dimmer
output is set at Non-Dim, its output level is held at zero percent until
the controlling slider reaches
5
. At
5
(50 percent), the output level
goes to full. Non-Dim can be especially useful for controlling a practical
or for devices such as smoke pots that do not function effectively
when controlled with a dimmer.
Follow these steps to assign Non-Dim output to a given dimmer:
1. Press [Clear] until the display reads:
DIMMER=
2. Press [1][0] to select dimmer 10. Display reads:
DIMMER = 10
Note: Dimmer 10 is used here as an example.
3. Press [At][N-Dim]. Display reads:
DIMMER = 10 @ ND
4. Press [Dim] to record your choice and return to the previous
screen.
www.carlosmendoza.com.mx