![background image](http://html1.mh-extra.com/html/acclaim-lighting/300-series/300-series_user-manual_3686265055.webp)
48
Chapter 4 Learning the basics
Example
Follow this example to create scenes A and B and run a manual
crossfade between the two scenes. Before you start, make sure
Grandmaster is set at
10
and the [B/O] LED is not lit.
Action
Effect
Set scene A cross faders at
10
Sets scene A at full, and scene B
and scene B cross fader at
0
.
output at zero.
Set Time slider at
0
.
Sets fade time at zero (fade is
manually controlled by moving
cross faders).
Set sliders 1 through 10
Sets scene A channels 1 through
at
10
; set remaining scene A
10 at 70 percent; all other
sliders at
0
.
channels are set at zero percent.
Set scene B sliders 6 through
Sets scene B channels 6 through
10 at
4
; set remaining
10 at 40 percent; sets all other
channels at
0
.
channels at zero percent.
Move scene A cross fader to
Fades scene A out and brings
0
and scene B cross fader
scene B up on stage.
to
10
simultaneously.
Move scene A cross fader to
Fades scene B out and brings
10
and scene B cross fader to
scene A up on stage.
0
simultaneously.
www.carlosmendoza.com.mx