Chapter 5 Learning advanced techniques
85
Editing chases
Once you have created a chase, you can edit it by adding or removing
steps, or by adding or subtracting channels from steps that already
exist.
Adding a step to an existing chase
Follow these steps to add a step to an existing chase:
1. Press [Chase]. Display reads:
To Run, Select Chase #
LOAD
SAVE
EDIT
2. Press [F3] (Edit). Display reads:
To Edit, Select Chase #
Unused Steps> 60
QUIT
3. Press the channel bump button that corresponds to the chase to
which you want to add a step. Display reads as below.
Chase>10
Now>5
End>7
LAST
NEXT
INS/DEL
Chase 10 is used here as an example. Now>5 means that the
current step is step 5; End>7 means that there are seven steps in
the chase
4. Press [F1] (Last) or [F2] (Next) until the step prior to the one you
want to add is displayed at
Now>
.
5. Press [F3] (Ins/Del). Display reads as below.
Chase>10
Now>5
End>7
INSERT
DELETE
QUIT
www.carlosmendoza.com.mx