30
Chapter 3 Entering softpatch and system settings
Using [Out]
[Out] lets you unpatch a specific dimmer, and reset its output without
affecting the output of other dimmers patched to the same channel.
Follow these steps to use [Out]:
1. Determine which dimmer you want to unpatch.
2. Press [Clear] until the display reads:
DIMMER=
3. Enter desired dimmer number, or use [At] and [Thru] to select a
group of dimmers.
4. Press [Out], specified dimmer is unpatched from its assigned
channel and its output is set at [Output] output level. Other
dimmers patched to the channel are unaffected.
Note: Pressing [Plus] unpatches the next consecutive channel and
sets its output at [Out] level. Pressing [Minus] unpatches the
previous consecutive channel and sets its output at [Out] level.
5. Press [Enter] to repatch dimmer. Dimmer or dimmers are restored
to their softpatch assignment.
www.carlosmendoza.com.mx