Chapter 5 Learning advanced techniques
77
Loading memories to cross faders
Loading a memory to a cross fader allows you to run manual or timed
crossfades between the memory and a scene, memory or submaster
loaded into the other cross fader. When the memory is loaded, its
output can be controlled by the cross fader or the channel slider
where the memory is stored. .i.Memories:loading
When you load a memory to a cross fader, it remains there until you
bring it up, then fade it out. The cross fader then reverts to controlling
scene output levels.
Follow these steps to load a memory into a cross fader:
1. Set the cross fader to zero.
2. Press the [Load] button over the cross fader where you want to
load the memory. Display reads:
To Load, Select Mem/Sub
QUIT
3. Press the channel bump button where the memory you want to
load is stored. The display is illustrated below.
①
②
③
①
②
③
00 00 :00 |FL FL :00 |
⑥
M>1 MAN | MAN MAN | FL
④
⑤
④
⑤
⑦
①
Cross fader settings
➁
Cross fader output levels
③
Time slider settings
④
Current cross fader mode
M>1 indicates that memory one is loaded in the scene A
cross fader. MAN indicates that scene B cross fader is
controls scene B output.
⑤
Next cross fader mode to be loaded
⑥
Black out status
⑦
Grandmaster output level
4. Move the cross fader toward
10
to bring up the memory.
www.carlosmendoza.com.mx