75
10.10.2.4. Account numbers
Use the control buttons
to select
Account Numbers
.
Confirm your
selection by pressing the control button
under the word
Select
. To
cancel input, press the control button
under the word
Back
.
If you confirm
Account Numbers
with the
Select
button, you see the
following graphic display:
Use the control buttons
to select the account number you want
to change. To select an account number, press the control button
under the word
Select
.
To cancel input, press the control button
under the word
Back.
Enter the account number that you have received for transmitting from
the station.
Select Reporting, Social Care, Account Numbers to store any account
numbers that you wish the radio alarm panel to communicate during a
social care alarm call.
For social care reporting an account code can be up to eight
characters long (digits and letters).
When using Scancom or Scanfast report types (see below) the radio
alarm panel uses the last four to six characters of the account code. If
you key in four characters then the radio alarm panel uses only those
four characters. If you key in five characters then the radio alarm panel
pads the number of digits out to six by adding leading zeros.
When using Tunstall report type the radio alarm panel adds leading
zeros to make shorter account codes eight characters long.
10.10.2.5. Report Type
Use the control buttons
to select
Report Type
.
Confirm your
selection by pressing the control button
under the word
Select
. To
cancel input, press the control button
under the word
Back
.
If you confirm
Report Type
with the
Select
button, you see the following
graphic display:
Use the control buttons
to select a report type. For a list of report
types and their attributes, see the table below. Confirm your selection
by pressing the control button
under the word
Select
. To cancel
input, press the control button
under the word
Back
.
After sending the alarm according to the selected digital report type,
the panel opens a two-way audio channel. Select DTMF for the audio
connection. Depending on the report type selected, various functions
are available.
Function
SCANCOM
SCANFAST
TUNSTALL
Speaking
DTMF tone “2” Not available
DTMF “C”
Listening
DTMF tone “1” Not available
DTMF “*”
Switching
DTMF tone “*” Not available
Not available
Confirm call
DTMF tone “5” Not available
DTMF “# ”
Play
back
basic
message
DTMF tone “3” Not available
Not available
Table 21: Audio control for social calls
