23
NOTE:
The attribute soak test is only to be used if a detector is likely to
create false alarm. This function works automatically. To test the range
of a detector you need to use the walk test function and do not
activate the soak test. The soak test function disables the walk test
function as the detector will not create an alarm but makes a note in
the event log.
NOTE:
The attribute Force Omit Set needs to activated
10.3.5 Adding/deleting a detector
After programming zone attributes for all zones, exit the menu items
until you see the following graphic display:
Using the control buttons
select
Add/del detectors
. Confirm your
selection by pressing the control button
under the word
Select
. To
cancel input, press the control button
under the word
Back.
If you confirm
Add/del detectors
, you see the following graphic display:
Use the control buttons
to select a function. Confirm your
selection by pressing the control button
under the word
Select
. To
cancel input, press the control button
under the word
Back
.
See next section for a description of functions.
