45
10.7.4. Factory settings
Use the control buttons
to select
Restore defaults
. Confirm your
selection by pressing the control button
under the word
Select
. To
cancel input, press the control button
under the word
Back
.
If you confirm
Restore defaults
with the
Select
button, you see the
following graphic display:
Use the control buttons
to select a function (see Table 15). To
select a function, press the control button
under the word
Select
.
To cancel input, press the control button
under the word
Back.
Function
Meaning
Country defaults
If you select
Country defaults
, a list of different
countries is displayed. The country settings refer
to the factory settings and settings for the
telephone. Select the country where the panel
is situated. (For Austria or Switzerland, select
D
).
The setting relates to the language selected.
Factory defaults
Confirm this function to reset all settings to the
factory defaults for the selected country.
However, select Factory Defaults does not
erase the log or stored voice memos.
10.7.5. Installer code
Use the control buttons
to select
Installer code
. Confirm your
selection by pressing the control button
under the word
Select
. To
cancel input, press the control button
under the word
Back
.
If you confirm
Installer code
with the
Select
button, you see the
following graphic display:
Enter the new four-digit installer code. You are prompted to repeat the
new installer code. If your two inputs are identical, the new code is
stored and is active.
The default Installer access code is 7890. Security Center
recommend that you change this code to some other number.
The Installer code allows you to enter the Installer Menu, and carry
out an Installer reset. However, the Installer code does not allow
you to set or unset the system.
