30
You see the following graphic display:
If the WAM is in learn mode, activate the sending of a message by
pressing the control button
under the word
Send
. To cancel input,
press the control button
under the word
Back
.
After activating send mode, you receive the following graphic display:
If the receiver beeped twice, the learn message was correctly
received. End the teach process by pressing the control button
under the word
Yes
. To cancel input, press the control button
under the word
No.
The learn procedure now starts again.
After ending the learn procedure, you receive the following graphic
display:
To add another output to the radio alarm station, press the control
button
under the word
Add
. To edit the output you have just
trained, press the control button
under the word
Edit
.
