40
10.6.2 Configuring exit delay of partition
After entering the
exit mode
for the partition, you have to enter the
delay time for the following cases:
Exit mode = Timed Set or
Exit mode = Silent Set
Press the control button
to select
Exit Time
. Confirm by pressing
the control button
under the word
Select
. To cancel input, press
the control button
under the word
Back
.
If you confirm
Exit Time
with the
Select
button, you see the following
graphic display:
Use the control buttons
to select the respective
exit time
. Confirm
your selection by pressing the control button
under the word
Select
. To cancel input, press the control button
under the word
Back
.
10.6.3. Configuring entry delay of partition
Define the entry delay in the same way as the exit delay. Configure the
entry delay for each exit mode.
10.6.4 Activating alarm response of partition
After entering the
delay times
, use the control buttons
to select
Response
. Confirm your selection by pressing the control button
under the word
Select
. To cancel input, press the control button
under the word
Back
.
If you confirm
Response
with the
Select
button, you see the following
graphic display:
Use the control buttons
to select an alarm response of the
partition when the panel/partition is set.
Function
Meaning
Siren
On alarm, the internal siren and the (optionally
connected) external siren are activated.
Siren + Comms
In addition to the activation of the local siren,
the alarm is transmitted by telephone.
Confirm your selection by pressing the control button
under the
word
Select
. To cancel input, press the control button
under the
word
Back
.