61
Function
Meaning
Call Mode
Setting for reporting alarm messages
Primary Telecoms
You must use this option to select which
route the radio alarm panel will pick first for
sending reports.
Phone Book
Select a phone number for transmitting alarm
messages.
IP Network
Account Numbers
For entering the account numbers by the
command centre
Report Type
For entering the digital command centre report
for alarm transmission to the command centre
Fast Format
Settings within the Fast Format report
Fast Format Reset
Settings within the Fast Format report for
resetting
SIA Report
Settings within the SIA report
SIA Report Reset
Settings within the SIA report for resetting
Contact ID
Settings within the Contact ID report
Force Test Call Now
Use this option to make the radio alarm panel
start a test call immediately.
Dyn. Test call
Settings for dynamic test call
Static Test Call
Settings for static test call
Burg Comms Rearm Settings for automatically restoring activation of
transfer in Fast Format report.
Send
Tamper
as
Burg
Settings for transmitting a tamper alarm as
intrusion alarm
Table 19: Menu items in the ALARMS menu
10.10.1.1. Call Mode
Use the control buttons
to select
Call Mode
.
Confirm your
selection by pressing the control button
under the word
Select
. To
cancel input, press the control button
under the word
Back
.
If you confirm
Call Mode
with the
Select
button, you see the following
graphic display:
Use the control buttons
to select a
function
. For a list of functions
and their attributes, see the table below. Confirm your selection by
pressing the control button
under the word
Select
. To cancel
input, press the control button
under the word
Back
.
Function
Meaning
Disabled
No alarm messages are transmitted to the
command centre.
Single
The alarm panel transmits alarm messages to
the first phone number in the phone book
together with the first account number for
identification. If transmission if not confirmed,
the panel repeats the call up to 15 times.
Alternate
The panel first transmits alarm messages to the
first phone number in the phone book. If the line
is busy, the alarm is transmitted to the second
number in the phone book. This continues up to
15 times until confirmed, always alternating
between the two phone numbers.