44
10.7.2. Remote Access
This menu controls access to the remote control feature. This
feature allows a remote operator to issue commands to the radio
alarm panel by pressing the buttons on a telephone keypad. The
commands available are:
To:
Key-in
Unset the system
#0*0
Set the system
#0*1
Part set the system
#0*2
Silence the Sounders
#1*0
Reset the system
#1*1
Interrogate the system
#3*
Switch output nn ON
#9*nn*1
Switch output nn OFF
#9*nn*0
Toggle output nn
#9*nn*
See “Operating Instructions” for more details.
There are two options:
Call-out control
If you set this option to Y then the remote operator can control the
system when they answer a call from the radio alarm panel.
If you set this option to N then the remote operator can still use the
speech dialler commands, but cannot use the remote control
commands.
Call-in control
If you set this option to Y then the remote operator can call the
radio alarm panel. After sending an access code to radio alarm
panel to identify themselves, the remote operator can issue
commands from their telephone keypad.
Note: If you set “Call-in control” to Y then the radio alarm panel will
not answer incoming calls from Downloader.
10.7.3. Selecting a language
Use the control buttons
to select
Language
. Confirm your selection
by pressing the control button
under the word
Select
. To cancel
input, press the control button
under the word
Back
.
If you confirm
Language
with the
Select
button, you see the following
graphic display:
Use the control buttons
to select a language. To select a
language, press the control button
under the word
Select
.
To
cancel input, press the control button
under the word
Back.
