Pressing the center button of the Session D-pad triggers the
selected clip. Hold Shift and press the center button of the Session
D-pad to trigger the selected scene. Clips in other tracks are not
affected.
Exclusive Arm determines whether multiple tracks can be armed at the
same time or not. When set to On, only one track can be record-armed
at a time. When set to Off, multiple tracks can be armed.
You can switch on Link synchronization so that Push can connect and
stay in time with other Link-enabled devices.
If Play Sync is enabled, start and stop commands will be synced across
all connected apps that have Start Sync Stop activated.
2.2.2 Expression Tab
The Expression Tab.
In this tab you can set the Note Pitch Bend behavior, as well as switch
between three Expression Modes: MPE, Poly Aftertouch, and Mono
Aftertouch.
Per-note pitch bend is automatically enabled for Live devices that can
receive per-note pitch bend data. If a device does not have per-note
pitch bend, then you can slide your finger horizontally on a pad to
retrigger notes (aka glissando). You can switch this automatic behavior
on or off using the encoder above Note Pitch Bend. When set to On,
7/29/23, 9
:
32 AM
Page 9 of 193
