Input Settings in Track Mix Mode.
As previously mentioned, the input is set to channel 1 by default, but
you can change this to channel 2 or 1 / 2 if you are using both inputs for
a stereo instrument. When an ADAT extender is connected, you can
also use channels 9-16. If you are using Push in Control Mode with an
external audio interface, the inputs shown will be based on what is
available for that interface.
The encoder above Input Type lets you select the input for your track.
By default this is set to Ext. In when using Standalone Mode or an
external audio interface in Control Mode. You can use the encoder
above the Input Channel to select the channel you’d like to use.
You can use the encoder above Input & Output to switch to the Output
settings, as well as select an Output Type using the corresponding
encoder if needed; the default output is the Master track.
Output Settings.
10.1.3 Track Monitoring
Audio tracks have input monitoring set to Auto by default, so that you
can hear the incoming audio when the track is armed and also hear
clips as they are played back.
If you want to permanently monitor the track’s input, regardless of
whether the track is armed or clips are playing, change the monitoring
7/29/23, 9
:
32 AM
Page 139 of 193
