button again. The locked/unlocked state will be stored for each track.
Each loop length pad corresponds to a page of steps, and the length of
a page depends on the step resolution. In the Melodic Sequencer, one
page of eight steps is available at a time, for a total of two beats.
To change the loop length, hold one of the loop length pads and then
tap on the other one where you would like the loop to end. You can also
set the loop length to exactly one page by quickly double-tapping on
your preferred loop length pad.
Note that the page you see is not necessarily the page you hear. When
you set the loop length, the pages will update so that the current play
position (which is indicated by the moving green pads) always remains
visible.
In some cases, you may want to switch off this auto-follow behavior.
For example, you may want to edit a single page of a longer loop, while
still having the loop play for the entire loop length. To do this, single-tap
the loop length pad that corresponds to that page. This will lock the
view to that page without changing the loop length. You can navigate to
the previous or next page using the Page Left and Page Right buttons.
7/29/23, 9
:
32 AM
Page 106 of 193
