manualshive.com logo in svg

abi 7500, Getting Started Manual

Share
Download
abi 7500 Getting Started Manual Download Page 229

Appendix A

Alternate Experiment Workflows

Advanced Setup Workflow

205

Applied Biosystems 7500/7500 Fast Real-Time PCR System Getting Started Guide for Relative Standard Curve 
and Comparative C

T

 Experiments

Notes

4.

Prepare the PCR reactions:

5.

Run the experiment:

IMPORTANT!

While the 7500/7500 Fast instrument is performing a run, do not 

create experiments, perform maintenance, or allow the computer to run antivirus 
software or to enter hibernation. Performing such activities while the instrument is 
running an experiment will cause gaps in data collection.

a.

Load the reaction plate into the instrument.

b.

Start the run.

c.

(Optional) Monitor the run.

d.

Unload the reaction plate from the instrument.

6.

Analyze the data:

a.

Open the experiment in the 7500 software.

b.

In the navigation pane, click 

Analysis

.

c.

If the data are not analyzed, click 

Analyze

.

d.

In the navigation pane, select an analysis screen to view the data (for example, 
select 

QC Summary

 to view a quality summary of the data).

Experiment Type

Prepare the…

Relative standard curve

a. Template.

b. Sample dilutions.

c. Standard dilution series.

d. Reaction mix.

e. Reaction plate.

Standard curve

Comparative C

T

a. Template.

b. Sample dilutions.

c. Reaction mix.

d. Reaction plate.

Genotyping

Presence/absence

Summary of Contents for 7500





































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands