manualshive.com logo in svg

abi 7500, Getting Started Manual

Share
Download
abi 7500 Getting Started Manual Download Page 14

Preface

Safety Conventions Used in This Document

Applied Biosystems 7500/7500 Fast Real-Time PCR System Getting Started Guide for Relative Standard Curve

and Comparative C

T

 Experiments

xii

Safety Conventions Used in This Document

Safety Alert

Words

Four safety alert words appear in Applied Biosystems user documentation at points in 
the document where you need to be aware of relevant hazards. Each alert 
word–

IMPORTANT, CAUTION, WARNING, DANGER

–implies a particular level of 

observation or action, as defined below.

Definitions

IMPORTANT!

– Indicates information that is necessary for proper instrument operation, 

accurate chemistry kit use, or safe use of a chemical.

 – Indicates a potentially hazardous situation that, if not avoided, may 

result in minor or moderate injury. It may also be used to alert against unsafe practices.

 – Indicates a potentially hazardous situation that, if not avoided, 

could result in death or serious injury.

 – Indicates an imminently hazardous situation that, if not avoided, 

will result in death or serious injury. This signal word is to be limited to the most extreme 
situations.

Except for IMPORTANTs, each safety alert word in an Applied Biosystems document 
appears with an open triangle figure that contains a hazard symbol. 

These hazard 

symbols are identical to the hazard icons that are affixed to Applied Biosystems 
instruments

 (see “Safety Symbols” on page xiii).

Examples

The following examples show the use of safety alert words:

IMPORTANT!

Wear powder-free gloves when you handle the halogen lamp.

The lamp is extremely hot. Do not touch the lamp until it has cooled to 

room temperature.

CHEMICAL HAZARD.

 Ethanol is a flammable liquid and vapor. 

Exposure causes eye, skin, and respiratory tract irritation and may cause central nervous 
system depression and liver damage. Read the MSDS, and follow the handling instructions. 
Wear appropriate protective eyewear, clothing, and gloves.

ELECTRICAL HAZARD.

 Failure to ground the instrument properly 

can lead to an electrical shock. Ground the instrument according to the provided instructions.

Summary of Contents for 7500





































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands