abi 7500 Getting Started Manual Download Page 154

Page: 154 / 260

Chapter 6

Design the Comparative C

Experiment

Review the Reaction Setup

Applied Biosystems 7500/7500 Fast Real-Time PCR System Getting Started Guide for Relative Standard Curve

and Comparative C

Experiments

130

Notes

Design

Guidelines

When you design your own comparative C

experiment:

• If you are using TaqMan reagents, select the type of assay you are using:

– Select

Inventoried/Made to Order

if you are using Applied Biosystems

TaqMan

Gene Expression Assays (Inventoried or Made to Order), or Applied

Biosystems Custom TaqMan

Gene Expression Assays.

– Select

Custom

if you are designing your own assays with Primer Express

software.

• Enter a number from 10 to 100 for the reaction volume/well. The 7500 system

supports reaction volumes from 20 to 100

L. The 7500 Fast system supports

reaction volumes from 10 to 30

• Include excess reaction volume to account for the loss that occurs during pipetting.

Applied Biosystems recommends an excess reaction volume of at least 10%.

• Review the reaction mix concentrations for each target: If needed:

– For TaqMan reagents, edit the master mix and assay mix concentrations.

– For SYBR Green reagents, edit the master mix, forward primer, and reverse

primer concentrations.

– For 1-step RT-PCR, edit the reverse transcriptase concentration.

• Review the reaction mix components for each target:

– If you are running Fast PCR reactions, make sure you use Fast master mix in the

PCR reactions.

– If you are running standard PCR reactions, make sure you use standard master

mix in the PCR reactions.

– For 1-step RT-PCR, make sure you include reverse transcriptase in the PCR

reactions and use a specific buffer.

• Review the sample dilution calculations for each sample. If needed, edit the diluted

sample concentration (including units) and stock concentration.

For More

Information

For more information on:

• Completing the Reaction Setup screen – Open the 7500 Software Help by clicking

or pressing

• Applied Biosystems assays – Refer to the:

–

TaqMan

Gene Expression Assays Protocol

–

Custom TaqMan

Gene Expression Assays Protocol

Summary of Contents for 7500





































































































































































































































































Search results

Summary of Contents for 7500

Reviews:

Brands by name

Popular brands

abi 7500, Getting Started Manual

Search results

Summary of Contents for 7500

Reviews:

Brands by name

Popular brands