manualshive.com logo in svg

abi 7500, Getting Started Manual

Share
Download
abi 7500 Getting Started Manual Download Page 103

Chapter 5

Analyze the Relative Standard Curve Experiment

Analyze the Experiment

79

Applied Biosystems 7500/7500 Fast Real-Time PCR System Getting Started Guide for Relative Standard Curve 
and Comparative C

T

 Experiments

Notes

6.

See “Navigation Tips” on page 80 for information on navigating within the analysis 
screens.

Preparing the

Experiment for

Review

The example file contains a single outlier (well A9) that has been omitted from the 
analysis for you. To use the experiment file with this chapter, you must include the well 
and reanalyze the experiment.

1.

Select the 

View Plate Layout

 tab, then select the outlier well that is marked (well A9).

2.

Right-click well A9, then select 

Include

.

3.

Click 

Analyze

. The software analyzes the data using the default analysis settings.

outlier

1

2

Summary of Contents for 7500





































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands