abi 7500 Getting Started Manual Download Page 10

Page: 10 / 260

Preface

How to Use This Guide

Applied Biosystems 7500/7500 Fast Real-Time PCR System Getting Started Guide for Relative Standard Curve

and Comparative C

Experiments

viii

Assumptions

This guide assumes that you:

• Are familiar with the Microsoft Windows

XP operating system.

• Are familiar with the Internet and Internet browsers.

• Know how to handle DNA and/or RNA samples and prepare them for PCR.

• Understand data storage, file transfer, and copying and pasting.

• Have networking experience, if you plan to integrate the 7500/7500 Fast system into

your existing laboratory data flow.

Text Conventions

This guide uses the following conventions:

•

Bold

text indicates user action. For example:

Enter

, then press

Enter

for each of the remaining fields.

•

Italic

text indicates new or important words and is also used for emphasis. For example:

Before analyzing,

always

prepare fresh matrix.

• A right arrow symbol (

) separates successive commands you select from a drop-

down list or shortcut menu. For example:

Select

File

Open

User Attention

Words

Two user attention words appear in Applied Biosystems user documentation. Each word
implies a particular level of observation or action as described below:

Note:

– Provides information that may be of interest or help but is not critical to the use

of the product.

IMPORTANT!

– Provides information that is necessary for proper instrument operation,

accurate reagent kit use, or safe use of a chemical.

Examples of the user attention words appear below:

Note:

The Calibrate function is also available in the Control Console.

IMPORTANT!

To verify your client connection, you need a valid user ID.

Applied Biosystems 7500/7500 Fast Real-
Time PCR Software v2.0 Help

Explains how to use the 7500/7500 Fast software to:

• Set up, run, and analyze experiments using the 7500/7500

Fast system.

• Calibrate a 7500/7500 Fast instrument.

• Verify the performance of a 7500/7500 Fast instrument with

an RNase P run.

Intended for:

• Laboratory staff and principal investigators who perform

experiments using the 7500/7500 Fast system.

• Laboratory staff responsible for the installation and

maintenance of the 7500/7500 Fast system.

Guide

Purpose and Audience

Summary of Contents for 7500





































































































































































































































































Search results

Summary of Contents for 7500

Reviews:

Brands by name

Popular brands

abi 7500, Getting Started Manual

Search results

Summary of Contents for 7500

Reviews:

Brands by name

Popular brands