Description of application and parameters
Application "Function block x"
Product manual 2CKA001473B9488
│61
11.5
Application "Function block x"
Depending on the device type, from one to six function blocks with buttons and LED
applications for up to 12 buttons are available:
■
Function block 1: Settings for buttons 1 and 2.
For a 1gang device only one function block with a 1-button application is available.
■
Function block 2: Settings for buttons 3 and 4.
■
Function block 3: Settings for buttons 5 and 6.
■
Function block 4: Settings for buttons 7 and 8.
■
Function block 5: Settings for buttons 9 and 10.
■
Function block 6: Settings for buttons 11 and 12.
11.5.1 Function block x - Application
Button applications:
Options:
1-button switching
1-button dimming
1-button blind
1-button short-long operation
1-button value transmitter
1-button value transmitter, 2 objects
1-button step switch
1-button multiple operation
1-button light scene extension unit with memory function
1-button operating mode, "Adjust RTC"
2-button switching
2-button dimming
2-button blind
2-button value transmitter
2-button value dimming sensor
2-button step switch
Inactive
Note
The following parameters can only be adjusted when the corresponding
application (see above) is selected.
■
1-button switching:
– The application makes it possible to switch a light via a button. Additional information,
See “Application - 1-button switching“ on page 64.
■
1-button dimming:
– The application makes it possible to dim and switch a light via a button. Additional
information, See “Application - 1-button dimming“ on page 66.
■
1-button blind: