1SDH002031A1002 ECN000092998 Rev. B
SACE Tmax XT2
– XT4 | 29
Settings Menu
Menu
Submenu
Description and parameters
Page
Circuit breaker
Configuration
(1)
Description in the dedicated chapter
Hardware Trip
Description in the dedicated chapter
Protection T
Description in the dedicated chapter
Neutral Protection
(2)
Function parameters and commands: see
the details in the dedicated chapter
Grid frequency
--
Grid frequency configuration
Phase sequence
--
Phase sequence configuration
Modules
Local/Remote
Parameter save configuration
Local Bus
Local bus presence configuration
Module x
(3)
Details in the chapters of each module
BLE
BT communication configuration
Functions
Switch On LOCAL, RESET alert
Measurement range
--
Measurement interval configuration
Bus Test
--
Enable bus test
Power Controller
(4)
Enable
(5)
Function enabling and parameters: see the
details in the dedicated chapter
-
Load Shedding
(4)
Enable
(5)
Function enabling and parameters: see the
details in the dedicated chapter
-
Network Analyzer
(6)
Enable
(5)
Function enabling and parameters: see the
details in the dedicated chapter
-
Datalogger
(6)
Enable
(5)
Function enabling and parameters: see the
details in the dedicated chapter
-
Dual Setting
(6)
Enable
(5)
Enable function
Default setting
Default setting configuration
System
Data
Unit date configuration
Time
Unit time configuration
Language
Menu language configuration
New password
Password configuration
View
Client page
Description in the dedicated chapter
Display contrast
--
Description in the dedicated chapter
Functions
YO Command
Function, Delay
YC Command
Function, Delay
Maintenance
Alerts
Enable maintenance alerts
MLRIU
(7)
-
Motor protection parameters: see the details
in the dedicated chapter
NOTES:
(1) Available with CB in 3P configuration
(2) Available with CB in 4P or 3P + N configuration
(3) The menu is populated with the list of accessory modules detected by units with
Local Bus
enabled and connected and powered as required
(4) Available if the function is installed on a Trip unit
(5) The list of the specific submenu is only populated with the function enabled (= On)
(6) Available if required by the Trip unit model or if the relative software package has
been enabled
(7) Available with Ekip M Touch
Summary of Contents for SACE Tmax XT2
