ABB PVS800-57-0100kW-A, Hardware Manual, Page: 42 / 180

40 Operation principle and hardware description

Descriptions of symbols
Symbol Terminal/Component Description/Operation
1 DC input terminals The solar generator is connected to the inverter DC input terminals
with busbars and fuse links.
2 AC output The AC output terminals connect the inverter to the low-voltage AC
power system.
3 Auxiliary control
voltage input The customer supplies 230 V AC 1-phase auxiliary control voltage to
the inverter circuit boards, cooling fans and contactor control circuits.
For other voltages, see section
External 100 V AC, 115 V AC or
200 V AC auxiliary power supply (oG396, +G397 and
+G398)
on page 39 .
4 Transformer The transformer connects the inverter AC side to the low-voltage or
medium-voltage distribution network.
5 Junction box power
supply (G410) The inverter supplies power to the junction box through terminal X21.
Max 6 A. Fault current protected.
A20 Grounding board (with
oF282 and
+F283) Provides fuse protection and current monitoring. See section
Positive or negative pole grounding (oF282 and +F283) on
page 42 .
A50 Varistors For overvoltage protection.
C11
C16 EMC filter capacitor Reduces electromagnetic interference.
F1.1
F1.4
F1.7 AC fuses Protect the inverter module and main circuit components.
F2.1
F2.3
F2.5 Inverter DC fuses Protect the inverter module.
F3.x Input DC fuses Protect the DC input connections. The exact number of the fuses
depends on the number of the DC input connections.
F50
F51
F52 Overvoltage
protection devices
(F50 with option
+F263 only) Devices for overvoltage protection against, for example, climatic
overvoltages caused by lightning strikes.
K1.1
K1.2
K1.3 AC contactors The inverter controls the AC contactor according to the operational
state.
K2.1
K2.2
K2.3 DC contactors The inverter controls the DC contactor according to the operational
state. The solar generator is disconnected from the inverter when
needed.
K19.1
K19.2
K19.3
R1.1
R1.2
R1.3
F19.1
F20.1-6
Charging circuit The inverter controls the charging contactors after receiving a start
command.