ABB i-bus
®
KNX
Start-up
28 2CDC508116D0203 | FCL/S x.6.1.1
Enable communication object
"Status Byte mode" 1 byte
Options:
No
Yes
This status byte indicates the states of Control value selection, Automatic, Forced operation and the four
Limitations via a 1 bit coding.
For further information see:
Fan status byte, forced/operation
Yes
: The communication object
Status Byte mode
is enabled. The following parameter appears:
Send object values
Options:
No, update only
Only after changing
After request
After a change or request
No, update only
: The status is updated but not sent.
Only after changing
: The status is sent after a change.
After request
: The status is sent after a request.
After a change or request
: The status is sent after a change or a request.
Summary of Contents for i-bus KNX FCL/S 1.6.1.1
