Aastra 400 Series System Manual Download Page 394

Page: 394 / 592

Features

394

System functions and features as of R3.0

syd-0367/1.3 – R3.0 – 03.2013

System configuration

Tab. 178 Presence Profiles User configuration

Reference to Other Features

Parameter

Parameter value

Remarks

Description

<Text>

An additional text can be typed in here to be dis-
played to the caller in addition to the presence sta-
tus. Example: "I'm in the laboratory."

Call forwarding type

Keep settings as is

For-

warding off

*21 to call

number

*21 to voice mail

Keep settings as is

: A call is routed in accordance

with the user settings.

Forwarding off

: Any configured call forwarding

action is deleted.

*21 to call number

: A call is routed to the defined

forwarding destination.

*21 to voice mail

: A call is routed to voice mail. The

parameter

Voice mail greeting

is used to configure

which greeting is played back.

Call forwarding destina-
tionl

Can only be defined if the

call forwarding type

*21 is on call number

. The same destinations are

possible as for ordinary CFUs.

Personal call routing

None

Activate

This specifies whether or not the presence profile is
also to activate a personal call routing.

Call routing ID

<1...5>

Number of the personal call routing

Voice mail greeting

Keep settings as is

Absence

information

Global greeting

Personal greeting 1

Per-

sonal greeting 2

Personal

greeting 3

If the personal greeting was given a different name, that name is listed in the selection.

Keep settings as is

: The greeting used is the one cur-

rently set with the user.

Absence information

: The caller is played an

absence information (as well as the date and time if
so configured in the activated presence profile

Global greeting

: The caller is played the global

greeting.

Personal greeting 1...3

: The caller is played one of

the personal greetings.

The date and time cannot be entered with AMS; this is only possible using a system phone.

State

Activated

Deactivated

One of the 5 presence states can be activated here.

Features:

•

"Call Forwarding Unconditional (CFU)",
page 370

•

"One Number user concept", page 368

•

"Voice mail system", page 417

Summary of Contents for 400 Series

















































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 400 Series

Reviews:

Related manuals for 400 Series

Brands by name

Popular brands

Aastra 400 Series, System Manual

Search results

Summary of Contents for 400 Series

Reviews:

Related manuals for 400 Series

Brands by name

Popular brands