Features
492
System functions and features as of R3.0
syd-0367/1.3 – R3.0 – 03.2013
Terminating a call connection
There is no time limit to the duration of a verification call, which must be termi-
nated by the user on the destination phone or by the user on the monitoring
phone. Once the call has been cleared down, the monitoring phone switches back
to monitoring mode without delay.
Calls during passive room monitoring
If another internal or external user calls the phone on which passive room monitor-
ing is activated (mode 3), the phone signals the call
visually and acoustically
and
the call can be answered in the usual way.
Tip:
Passive room monitoring is indicated on the monitoring phone by the
display reading
Room monitoring for ...
; no exclamation mark is displayed.
Note: The same display is also shown with active room monitoring before
a delay expires. This is due to the fact that the status “active room moni-
toring with deactivated microphone” is equivalent to passive room moni-
toring.
9. 6. 27
Conversation recording
This feature allows you to record an internal or external call and send it to one or
more e-mail addresses as a wave file (G.711 format). It is also possible to record a
conference.
Conversation recording with a system phone is either started manually via the Fox
key or through a function key, or automatically during each call. If started manually,
conversation recording can be stopped at any time. This allows partial conversation
recording.
Detailed Description
Tab. 302 Conversation recording
Operating sequence / signalling on the phone
System phones
Other phones
• Start or stop the call recording using the Foxkey,
function key or automatically with every call.
• When call recording is in progress, a symbol
appears in the display of system phones (except on
the Aastra 6700i).
• Aastra 2380ip
• Aastra 600d
• Aastra 1560 / Office 1560
• Terminals of the series
Aastra 5300/Aastra 5300ip
• Terminals of the series
Aastra 6700i
Only automatic call
recording is possible.
