manualshive.com logo in svg

Aastra 400 Series, System Manual, Page: 395 / 592

Share
Download
Aastra 400 Series System Manual Download Page 395

Features

395

System functions and features as of R3.0

syd-0367/1.3 – R3.0 – 03.2013

9. 5

Connections involving several users

9. 5. 1

Music on hold

In the following chapters a user is put on hold in each case in connection with the 
features Hold, Brokering, Three-Party Conference and Call Transfer. Depending on 
the configuration selected for the parameter 

Music on hold

 the user on hold will ob-

tain the following:

Tab. 179 Parameter values for 

Music on hold

 (system-wide setting in CM_5.3)

Music on hold is played for internal and external calls, regardless of whether or not 
the call was routed via a call distribution element.

In addition to this system-wide setting, a different setting can be configured for 
each CDE using the 

Music on hold

 parameter in the CDE configuration.

Tab. 180 Parameter values for 

Music on hold

 in the CDE configuration (CM_3.1.4)

All calls routed via a CDE adopt the setting for music on hold in the CDE configura-
tion. This means that different welcome announcements can be defined and 
played for music on hold, e. g. for different departments within a company.

Parameter value

Meaning

Silence

The user hears nothing.

External audio source

Music from the audio equipment connected to the communication server’s 
audio input.

Internal audio source

Internal melody from wave file (replaceable)

Hold tone

Regularly recurring dual tone.

Welcome announcement

If this setting is selected, the 

Welcome announcement

 parameter can be used to 

select one of the predefined welcome announcements on the announcement 
service.

Parameter value

Meaning

Silence

 / 

External audio source

 / 

Internal audio 

source

 / 

Hold tone

 / 

Welcome announcement

see 

Tab. 179

.

Adopt music on hold (CM_5.3)

With this setting the value of the system-wide parameter 

Music on hold

 is adopted in CM_5.3 (see 

Tab. 179

.)

Summary of Contents for 400 Series

















































































































































































































































































































































































































































































































































































































Reviews:

No comments