Call routing
242
System functions and features as of R3.0
syd-0367/1.3 – R3.0 – 03.2013
User-specific configuration
The settings described in the last section can also be configured individually for
each user. The user-specific configuration takes priority over the setting for the sys-
tem as a whole. If a user’s settings are not to deviate from the settings made for the
system as a whole, the parameter has to be configured to
According to exchange
settings
(initialization value).
Specially configured abbreviated dialling numbers
Exchange-to-exchange traffic can be enabled in general for specially configured di-
rect dialling numbers (
Exchange-to-Exchange Connection
=
Yes
). This allows all
types of exchange-to-exchange connections, and is also valid in cases where ex-
change-to-exchange traffic is barred in the system configuration and the user-spe-
cific configuration. The abbreviated dialling number stored does not have to be
complete, which means digits can be suffix-dialled manually. This allows for exam-
ple exchange-to-exchange traffic to be enabled for an entire office branch using a
single abbreviated dialling number.
6. 7. 1. 1
Setting up Exchange-to-Exchange Connections
An exchange-to-exchange connection can be set up using Call Forwarding Uncon-
ditional, Conference, Call Forwarding on No Reply, Call Deflection and Transfer with
or without prior notice.
V
Transfer
C
Conference
CFU
Call Forwarding Unconditional
CFNR Call Forwarding on No Reply
CD
Call Deflection
Fig. 103
Exchange-to-Exchange Connection
