Routing elements
135
System functions and features as of R3.0
syd-0367/1.3 – R3.0 – 03.2013
5. 5. 2
Routing Functions for Incoming Calls
Call distribution is allocated the following incoming routing functions:
• Routing a call to a destination, depending on the position of the allocated
switch group (see
• Routing a call to an alternative destination if the original destination is either
busy or if the call goes unanswered (see
"Alternative Destinations", page 132
).
• Restricting the number of calls incoming simultaneously on each call distribu-
tion element (
Incoming connections
setting) As soon as this limit is exceeded, any
subsequent caller will obtain busy, provided no alternative destination
CDE if
busy
has been defined.
• Routing a call to data service destinations:
Data service destinations can be configured for each call distribution element
(see
).
• Routing a call to external remote control or modem:
This destination is normally allocated only once in every system to enable access
to external remote control via a DDI number. (See
from outside the system", page 537
.)
5. 5. 3
Routing Functions for Outgoing Calls
Outgoing calls via the line keys of a key telephone are routed via the route entered
under
KT route
(see
).
