Call routing
203
System functions and features as of R3.0
syd-0367/1.3 – R3.0 – 03.2013
Call destination: Busy User Group
A user group is busy if all its members are busy, if call waiting is rejected, if call wait-
ing is not enabled for any of the user group members and if neither the element
operator console nor the element general bell is activated.
If a user group is busy, an incoming call is routed to user group 16.
If Call waiting is not enabled for any of the members of user group 16, the caller is
obtains busy tone.
Call destination: Busy KT Line
If an incoming call is routed to a busy KT line, the call will be rejected and the caller
obtains the busy tone.
Call destination: User with a Stored Message
If a user has stored a message, an incoming call will be routed to the preconfigured
Call Forwarding Unconditional destination.
If a preconfigured Call Forwarding Unconditional destination has not been defined,
the user will be called nonetheless.
6. 3. 5. 2
Release Destination if Dialling is Incomplete
If the direct dial number is incompletely dialled, the outside call will be routed to
the call destination element allocated to the trunk group after 8 seconds and then
forwarded to the destinations entered there.
Scope
Valid only if the network provider transmits the digits of the direct dial numbers us-
ing the overlap receiving method. If the direct dial numbers are transmitted using
the en-bloc method, an incomplete direct dial number will never be transmitted to
the communication server.
Aastra Intelligent Net:
In an AIN the availability of Capolinea depends on the Master settings. If
the
Country
parameter is configured to
IT
on the Master, Capolinea is
available throughout the AIN.
