Home
/
Aastra
/
400 Series
/
System Manual

Aastra 400 Series, System Manual, Page: 147 / 592

Share

Page: 147 / 592

Aastra 400 Series System Manual Download Page 147

Routing elements

147

System functions and features as of R3.0

syd-0367/1.3 – R3.0 – 03.2013

Note:

A maximum of 50 terminals can be called simultaneously for each call.
This limit is quickly reached if a user group with global call distribution
contains many users with several terminals. If so, only the first 50 termi-
nals will ring, starting with the user group members with the lowest posi-
tion number.

Call Forwarding Unconditional (CFU) for user group members

Activated CFUs of user group members to internal destinations are always carried
out.

With CFUs to external destinations, PISN users, integrated mobile phone users or
voice mail the response depends on the configuration:

Tab. 35

CFUs of user group members: System configuration

A member remains in the user group when he activates a CFU to an external desti-
nation, a PISN user, an integrated mobile phone user or voice mail only if both pa-
rameters are configured to

Yes

.

If one of the parameters is configured to

No

, the CFU causes the member to be

switched out of the user group. The last remaining member in the member group
does not have the possibility of activating an external, PISN, mobile phone or voice
mail CFU and cannot log out of the user group.

Notes:

– This response applies only to unconditional CFU (*21) but not to cyclic

call distribution (*67) or CFNR (*61).

– If the communication server is connected to the PSTN via analogue

network interfaces, a user group member with an external, PISN
mobile phone or voice mail CFU is always switched out of the user
group.

Parameter

Parameter value

Remarks

Members remain in the UG in the case of external
Forwarding

<

Yes

/

No

>

Configuration per user group

Remain in user group with external forwarding

<

Yes

/

No

>

Configuration per user

«
...
145
146
147
148
149
...
»

Summary of Contents for 400 Series

















































































































































































































































































































































































































































































































































































































Reviews:

No comments