Aastra 400 Series System Manual Download Page 369

Page: 369 / 592

Features

369

System functions and features as of R3.0

syd-0367/1.3 – R3.0 – 03.2013

• Call lists and contacts are available on all system phones and are automatically

synchronised.

• If a user is not assigned a terminal, he cannot be reached by other users. The des-

tinations configured for when the user is unobtainable are applied.

• If the terminal is not assigned to any user, it cannot be used.

Not configured

then indicated on system phones with a display.

• An announcement made to a user is signalled on all of his terminals which sup-

port announcements.

• Fast Take (*88) can be used to answer a call from one terminal to another termi-

nal belonging to that same user. No special authorizations are required.

Restrictions:

• Only 16 terminals are allowed per user.

• Two cordless phones are allowed per user

• Only one each of the following terminals can be allocated to a user:

– Operator console

– Aastra 2380ip IP softphone

– Softphone Aastra BluStar for PC

– Aastra BluStar 8000i SIP phone

Functions in prefix dialling

Tab. 151 Functions

System configuration

Tab. 152 Personal call routing: System configuration

Functions

Function codes

Remarks

Activate personal call routing

*45 <Call routing 0...5> The default setting is 0 (call all terminals).

Deactivate personal call routing

#45

Activate Ring Alone

*41

Deactivate Ring Alone

#41

Parameter

Parameter value

Remarks

Call routing 1...5

Ring

Allocated terminals

tab in the user configuration. The default

setting 0 (all terminals on

Ring

) cannot be altered.

Description

<Name>

Allocated terminals

tab in the user configuration.

State

Activated

Deacti-

vated

Status display on the

Personal call routing

tab in the user

configuration.

Summary of Contents for 400 Series

















































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 400 Series

Reviews:

Aastra 400 Series, System Manual, Page: 369 / 592

Search results

Summary of Contents for 400 Series

Reviews: