83
8.15.2. Delay
time
Enter the delay time for DI1 to DI4 input signals.
Set the delay time when the device that is connected to DI has no function to delay signal outputs.
Set the time so that a signal from the external device is input within the DI receive time of the DI timing chart.
8.15.3. Chattering
Enter the time to prevent chattering of DI1 to DI4 input signals.
8.15.4. Polarity
Set the polarity of DI1 to DI4 input signals. DI5 to DI8 input signals are positive.
Positive: When the device on contact a turns on, DI signal is received. The Modbus setting is 0.
Negative: When the device on contact b turns on, DI signal is received. The Modbus setting is 1.
8.16. External
Devices
8.16.1. Monitoring the rejector
When the AD-4981 Flipper Type Rejector or AD-4982 Conveyor Drop Type Rejector is connected to the
checkweigher, the checkweigher monitors the behavior of the rejector.
8.16.2. With metal detector
Reserved for expansion. Do not change.
8.16.3. Printer IP address
Enter the IP address of the printer that is connected to the checkweigher.
8.16.4. Printer connection method
Set the connection method of the printer that is connected to the checkweigher.
The Modbus setting is 0: USB and1: LAN.
8.17. Date/Time
8.17.1. Date
Set the date (year, month and day) for the checkweigher clock.
For details, refer to “5.3. Setting the Date/Time.”
8.17.2. Time
Set the time (hour, minute and second) for the checkweigher clock.
For details, refer to “5.3. Setting the Date/Time.”
