71
8.1.
Product Name/Product Code
8.1.1. Product
name
Enter the name with a maximum of 12 characters to display in the Weighing and Product Setting screens.
8.1.2. Product
code
Enter the product code name with a maximum of 20 characters to display in the Weighing and Product Setting
screens.
8.2. Judgment
Basis
8.2.1. Target
value
Enter the mass of the product to be weighed as the target value.
For details, refer to “4.6.2. Setting the target, high limit and lower limit values.”
8.2.2.
High limit value
Enter the upper limit value of the product to be weighed.
For details, refer to “4.6.2. Setting the target, high limit and lower limit values.”
8.2.3.
Lower limit value
Enter the lower limit value of the product to be weighed.
For details, refer to “4.6.2. Setting the target, high limit and lower limit values.”
8.2.4. Reject
Over
“Reject Over” is the setting to treat an overweight product as OK.
When “Enable” is selected for “Reject Over”, the Reject Over mark
appears in the Weighing screen.
8.2.5.
Consecutive fail stop
“Consecutive fail stop” is the setting to stop the checkweigher automatically when failed products as many as what is
set as “Consecutive fail number” occur in succession.
When “Enable” is selected for “Consecutive fail stop”, the checkweigher will stop automatically.
8.2.6.
Consecutive fail number
Enter the number of failed products to occur in succession to stop the checkweigher automatically.
8.2.7. Product
length
Enter the length of the product to be weighed.
The product length is used to detect an unsplit product (The product length is longer than the specified product
length).
Touching the Measure a Product Length button in the Processing Performance Setting screen will measure the
length of the product automatically. For details, refer to “4.6.8. Measuring the product length.”
