80
8.14.2. Output
mode
Set the output mode when “A&D format” is selected for “Serial mode.”
Each mode is as follows:
1. Current
value
Outputs the current mass value.
2. Weighing
results
Outputs the weighing results when the judgment is complete.
3. In sync with the display
Outputs the displayed content in the weighing value field.
8.14.3. Modbus
Set Modbus communication.
When the settings are changed, restart the checkweigher to confirm the changes.
For details, refer to “9. Modbus Communication.”
Each setting is as follows:
1. Disable
Select to disable Modbus communication.
2. Modbus/RTU
Set when Modbus communication is performed through serial communication.
3. Modbus/TCP
Set when Modbus communication is performed using TCP.
8.14.4. Slave
address
Enter the slave address of the checkweigher for Modbus communication.
8.14.5. Baud
rate
Set the serial communication baud rate.
8.14.6. Parity
Set the serial communication parity.
8.14.7. Stop
bits
Set the serial communication stop bits.
8.14.8. Data
bits
Set the serial communication data bits.
8.14.9. Flow
control
Set the serial communication flow control.
