manualshive.com logo in svg

A&D AD-4961-2KD-2035, Instruction Manual

Share
Download
A&D AD-4961-2KD-2035 Instruction Manual Download Page 69

 

 

67

7.2. 

Connecting a LAN 

The LAN connection is used when Modbus communication is performed using Modbus/TCP. 

Insert one end of a commercially available LAN cable into the LAN connector located on the control box. And insert 

the other end of the cable into the LAN connector on a Modbus master device or into the Ethernet hub connected to a 

Modbus master device. 

 

Note: 

When Modbus communication is to be performed using Modbus/TCP, LAN settings on the checkweigher are 

required. 

For details about LAN settings, refer to “5.4. Setting LAN.” 

 

7.3. 

Connecting a Printer 

A printer is used to print graphs and summary results. 
For printer connection, two methods are available, LAN connection and USB connection.   

 

Note 

・ 

For printing, a PostScript printer is required. 

・ 

When connecting a printer on LAN, inquire your system administrator. 

・ 

For information on IP address setting to the printer, refer to the printer manual. 

・ 

When using a printer, set LAN settings, printer IP address (only for LAN connection) and printer connection 
method. 

・ 

For details on LAN setting, refer to “5.4. Setting LAN.” 

・ 

For details on printer IP address and connection method, refer to “8.16.3. Printer IP address” and “8.16.4. Printer 
connection method.” 

 

7.3.1. LAN 

connection 

Insert one end of a commercially available LAN cable into the LAN connector located on the control box. And insert 

the other end of the cable into the LAN connector on a printer or into the Ethernet hub connected to a printer. 

 

7.3.2. USB 

connection 

Insert one end of a commercially available USB cable into the USB terminal located on the display. And insert the 

other end of the cable into the USB connector on a printer. 

 

 

 

 

 

 

 

Summary of Contents for AD-4961-2KD-2035













































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands