75
8.7. Statistical
8.7.1.
Number of samples
Enter the number of samples to be used for generating control charts and summary results.
8.7.2.
Sample size (Sub samples)
Enter the number of samples to be used to obtain the average for the control chart.
8.7.3.
X
Enter the average for the
X
control chart.
When the
X
value is not 0, the
X
control chart is generated based on the value.
8.7.4.
R
Enter the average for the
R
control chart.
When the
R
value is not 0, the
R
control chart is generated based on the value.
8.7.5. Class
width
Enter the class width for the histogram.
When the class width is changed, the histogram data will be updated.
8.8. Weighing
Capacity
8.8.1. Weighing
capacity
Enter the weighing capacity.
Modbus setting is 0: 2000 g and 1: 500 g.
8.8.2.
Decimal point position
Set the decimal point position for the mass value.
When the weighing capacity is 2000 g, “0.00” cannot be selected.
8.8.3. Minimum
division
Set the minimum division for the mass value.
8.8.4. Unit
Set the unit of measure for the mass value.
