37
4.6.8.
Measuring the product length
A product is fed on the conveyor and the photosensor measures the length of the product.
Repeat the procedure three times and the average of the three measurements is set as the product length.
The product length measurement procedure is as follows:
Note:
The length of a transparent product may not be measured.
Should this occur, enter the product length directly or adjust the sensor position or sensitivity.
1. Touch the Processing Performance button of the setting menu to open the Processing Performance Setting
screen.
Touch the Measure a Product Length button to open the screen below.
Fig.34 Product length measurement start screen
2. Touch the Start button to open the screen below.
Fig.35 Product length measurement screen
Press the START button on the display to start the conveyor. Feed the product three times.
To cancel the measurement, touch the Cancel button.
