28
4.6.
Selecting the Product / Changing the Detect Function Settings
This section describes the product selection and detect function settings changing procedures.
The product registration is available only for the management level of Quality Manager or above.
This section is described under the assumption that the checkweigher has been logged in by the user with the
management level of Quality Manager.
Note:
About the setting values other than described in this section, refer to “8. Detailed Description of the Setting Values.”
During the operation, the setting will be saved each time it is changed.
To return to the previous screen during the operation, touch the RETURN key
.
4.6.1.
Registering the product
The product registration procedure is as follows:
1. In the Weighing screen, touch the Product key
to open the Product Selection screen.
2. Enter the group No. (1 to 10).
Touch the Left arrow key or Right arrow key to switch the Registration pages.
Touch the product No. to be registered or enter the product No. in the Product No. field. The product field of the
touched or entered product No. will turn orange to be ready for selection.
Fig.22 Product Selection screen
Product No.
Product name
Product code
Target value
Group No. field
Product No. field
Selected product field
